Portable Electric Rebar Cutter

Product details

Portable electric rebar cutter is an advanced product, which is widely used in construction engineering, power industry, fire fighting and rescue and other industries. It can be applied to cut normal carbon steel rod, hot rolled steel and deformed bar in construction projects, also suit for square steel and flat steel. Electric rebar cutter is an ideal equipment for cutting.

Our portable electric rebar cutter is equipped with big power electric engine and hydraulic piston. Itadopts gears, shafts, blades made of high-quality alloyed steel with required heat treatment (quenching/tempering/high frequency) and thick external case to ensure reliable performances also under heavy loads and long working life.

In addition, portable electric rebar cutter is more portable than the wheel-type, and very suitable for high-altitude operations. It is widely used in steel mills, coal mines, railways, oil fields, bridges, highways, housing construction and other industries need to quickly cut off the reinforcement of the place.

How to use:

1. Insert rebar into the groove of the working head, making sure that it is properly seated in U-shaped groove.

2. Pull trigger-switch and keep depressed while piston advances and rebar is cut off.

3. When cut is completed, release switch. Piston retracts automatically.

Points of attention:

1. When cutting, the rebar must be placed to the bottom. Do not hang the rebar for cutting.

2. Be especially careful when cutting off short lengths (30cm or less) as the cut end tends to fly out.

3. If hydraulic oil exceeds 60℃ in temperature, power will drop. Please stop for using until it cools down.

4. If a drop in power is observed and motor is unusually hot, check carbon brush.

http://www.centalltech.com/